TW-1225
TW series is high performance horizontal machining centers . this series is similar to MBM series but equipped with single work table.
Specifications
| Specification | Unit | TW-1225 |
| X Axis travel | mm | 2200 |
| Y Axis travel | mm | 1200 |
| Z Axis travel | mm | 1350 |
| Spindle surface to worktable center | mm | 230-1580 |
| Spindle center to worktable surface | mm | 150-1350 |
| Spindle taper | - | BT50 |
| Spindle speed | RPM | 6000 |
| Cutting feedrate | m/min | 1-8000 |
| Rapid federate (X,Y,Z) | m/min | 24/24/24 |
| X,Y,Z Axis motor | KW | 7/4/7 |
| Positioning (±) | mm | 0.012 |
| Repeatability (±) | mm | 0.008 |
| Spindle motor | KW | 22 |
| Spindle drive type | - | Belt (ZF Gear) |
| Bearing diameter | mm | 100 |
| Worktable size | mm | 1000×1200 |
| Worktable motor size | KW | 3 |
| T-Slot | mm | 150×22×7 |
| Max. speed on worktable | RPM | 11.1 |
| Worktable dividing | - | 1°×360 |
| Max. load on worktable | Kg | 3000 |
| Locking force (oil pressure 35kg/cm^2) | Kg/cm^2 | 5000 |
| Cutting out accuracy | Sec | 5 |
| Tool changer type | - | Chain |
| Tool changer capacity | T | 40 |
| Max. tool weight | Kg | 15 |
| Max. tool length | mm | 300 |
| Max. tool diameter | mm | 125 |
| Tool exchange time | Sec | 3.1 |
| Air required | Bar | 8 |
| Power required | KVA | 50 |
| Machine weight | Kg | 24000 |