TW-800

TW series is high performance horizontal machining centers . this series is similar to MBM series but equipped with single                          work table.

 

Specifications

Specification Unit TW-800
X Axis travel mm 1300
Y Axis travel mm 900
Z Axis travel mm 900
Spindle surface to worktable center mm 230-1130
Spindle center to worktable surface mm 150-1050
Spindle taper - BT50
Spindle speed RPM 6000
Cutting feedrate m/min 1-8000
Rapid federate (X,Y,Z) m/min 24/24/24
X,Y,Z Axis motor KW 7/4/7
Positioning (±) mm 0.012
Repeatability (±) mm 0.008
Spindle motor KW 22
Spindle drive type - Belt (ZF Gear)
Bearing diameter mm 100
Worktable size mm 800×800
Worktable motor size KW 3
T-Slot mm 125×22×6
Max. speed on worktable RPM 11.1
Worktable dividing - 1°×360
Max. load on worktable Kg 2000
Locking force (oil pressure 35kg/cm^2) Kg/cm^2 5000
Cutting out accuracy Sec 5
Tool changer type - Chain
Tool changer capacity T 40
Max. tool weight Kg 15
Max. tool length mm 300
Max. tool diameter mm 125
Tool exchange time Sec 3.1
Air required Bar 8
Power required KVA 50
Machine weight Kg 20000