TW-500
TW series is high performance horizontal machining centers . this series is similar to MBM series but equipped with single work table.
Specifications
| Specification | Unit | TW-500 |
| X Axis travel | mm | 700 |
| Y Axis travel | mm | 600 |
| Z Axis travel | mm | 600 |
| Spindle surface to worktable center | mm | 120-720 |
| Spindle center to worktable surface | mm | 100-700 |
| Spindle taper | - | BT50 |
| Spindle speed | RPM | 6000 |
| Cutting feedrate | m/min | 1-6000 |
| Rapid federate (X,Y,Z) | m/min | 24/24/24 |
| X,Y,Z Axis motor | KW | 3/3/3 |
| Positioning (±) | mm | 0.008 |
| Repeatability (±) | mm | 0.005 |
| Spindle motor | KW | 15 |
| Spindle drive type | - | Belt (ZF Gear) |
| Bearing diameter | mm | 100 |
| Worktable size | mm | 500×500 |
| Worktable motor size | KW | 3 |
| T-Slot | mm | 100×18×4 |
| Max. speed on worktable | RPM | 11.1 |
| Worktable dividing | - | 1°×360 |
| Max. load on worktable | Kg | 800 |
| Locking force (oil pressure 35kg/cm^2) | Kg/cm^2 | 4000 |
| Cutting out accuracy | Sec | 5 |
| Tool changer type | - | Disc |
| Tool changer capacity | T | 24 |
| Max. tool weight | Kg | 15 |
| Max. tool length | mm | 300 |
| Max. tool diameter | mm | 110 |
| Tool exchange time | Sec | 3.1 |
| Air required | Bar | 6 |
| Power required | KVA | 35 |
| Machine weight | Kg | 13000 |